About Digital Camera SettingsWhen operating the camera, be sure to follow the instructions given in the Instruction Manual suppliedwith the camera. Let’s take a look at the paper size, paper type, layout, image optimization modes,and date printing modes that can be set on the PictBridge-compliant camera connected to the printer.Confirming or Changing the Camera SettingsTo change the paper size or paper type, operate the camera to select the PictBridge print setup mode and confirm or change thesettings.The settings below can be changed by pressing the “Settings” button when the camera is connected. However, changes can be madeon in the properties screen only when the corresponding items below are in the “Default Setting” (selections based on the printersetting) using the controls of the camera.z Paper Sizez Paper Typez Borderless Printingz Print Qualityz Photo Optimizerz Noise ReductionAbout the Settings Explained BelowThe settings explained cannot be made depending on the brand or model of your camera.If any setting cannot be made, printing will bebased on the “Default Setting” specified with*.The items which the “Default Setting” is set will be printed based on the current printer setting.* Names of settings that are displayed on Canon PictBridge-compliant cameras are used in the description given below. Differentnames may be displayed on your camera depending on the brand or model.About “Paper Size” and “Paper Type”When you have select the “Default setting” (selections based on the printer setting), the printer operates based on the “Paper Size” andthe “Paper Type” settings made using the controls of the printer.The following sizes and types of paper can be loaded in the printer by selecting options in “Paper Size” and “Paper Type”.“Paper Size” setting “Paper Type” setting Paper loaded in printer10×15cm / 4"×6" (Default) Photo (Default) Photo Paper Plus GlossyFast Photo Photo Paper Pro13×18cm / 5"×7" Photo Photo Paper Plus GlossyFast Photo Photo Paper ProA4 Photo Photo Paper Plus GlossyFast Photo Photo Paper Pro PR-101