Components Guide 41The camera indicators on the back of the camera will light or blinkunder the following conditions.• Upper Indicator• Lower IndicatorThis camera is equipped with a power saving function. The power willshut off in the following circumstances. Press the power button again torestore power.* This time can be changed.IndicatorsGreen: Ready to shoot (camera beeps twice)Blinking Green: Image recording/reading/erasing/transferring (whenconnected to a computer)Orange: Ready to shoot (flash on)Blinking Orange: Ready to shoot (camera shake warning), chargingflashYellow: Macro mode/Manual focus mode/AF lock modeBlinking Yellow: Focusing difficulty (camera beeps once)Never do the following while the indicator blinks green. Theseactions may corrupt image data.- Shake or jolt the camera- Shut off the power, or open the memory card slot/batterycoverPower Saving FunctionShooting Mode Powers down approximately 3 minutes after thelast control is accessed on the camera. The LCDmonitor automatically turns off 1 minute* afterthe last control is accessed even if [Auto PowerDown] is set to [Off]. Press any button other thanthe power button or change the cameraorientation to turn the LCD monitor back on.Playback ModeConnected to a PrinterPowers down approximately 5 minutes after thelast control is accessed on the camera.z The power saving function will not activate during an AutoPlay or while the camera is connected to a computer.z The power saving function settings can be changed (p. 47).
