131Appendix FInterface SpecificationsParallel interfaceTo connect this printer with a computer via the parallel interface connector provided on the printer,you must use the Canon Printer Cable BIFC-50 provided with printer (or its equivalent).Interface type: Parallel Centronics with 1mm-pitched connector.Interface cableType:Material:Length:Twisted-pair shielded cableAWG#281.5m(5ft)Interface connectorsPrinter side:Cable side:Japan Molex 52629-2611 (or equivalent)Fujitsu Takamisawa Component FCN-28øP26 G/E (or equivalent)IrDA interfaceBecause of its simplicity and versatility, the IrDA interface, controlled by the Infra-red DataAssociation, is rapidly gaining popularity among users of personal computers.Interface type: IrDA 1.0 CompatibleData rates: Maximum 115.2 kbpsEffective angle: ±15ºEffectivedistance: Maximum 1.0 m (3.2 ft.)131
