Canon BJC-5000 Service Manual

Also see for Color Bubble Jet BJC-5000 Series: Parts catalog User manual

Part 3: Operating InstructionsBJC-50003-132. TRANSPORTING THE PRINTERTo carry or transport the printer, keep the BJ cartridge installed in the printer or storedin the BJ cartridge container. This will prevent printing defects caused by ink leakage ordried out ink on the nozzles of the BJ cartridge.2.1 Carrying the PrinterFollow the procedure below to move the printer.1) Press thePOWER button to turn off the printer. When the power is turned off, theindicator goes out.2) Disconnect the interface cable.3) Unplug the AC power cord from the AC outlet.4) Make sure that the BJ cartridge is at the capping position (the right end of theprinter). If the cartridge is not at the capping position, move the carriage to thecapping position by hand. (See“Part 5: 4.2.3 Unlocking the carriage lock” on page 5-6 fordetails on the manual capping method.)Never turn off the printer by unplugging the AC power cord without firstpressing thePOWER button. Otherwise, the printer is turned off before itcan cap the BJ cartridge. Also, do not carry a BJ cartridge removed fromthe printer by itself. If the BJ cartridge is not capped, the ink may leak ordry out in the nozzles.2.2 Transporting the PrinterFollow the procedure below to transport the printer.1) Disconnect the interface cable and unplug the AC power cord as described in 2.1,“Carrying the Printer.”2) Make sure that the carriage is locked at the capping position (the right end of theprinter). If the carriage is not at the capping position, move the carriage to thecapping position by hand (See“Part 5: 4.2.3 Unlocking the carriage lock on page 5-6 forlocking of the carriage.)3) Repack the printer in its original box and packing materials.If the original packing materials are not available, use a sufficient amountof shock-absorbent material to pack the printer.CAUTIONNOTEFigure 3-14 Carriage Capping Position