Install the Ink TanksUnpack the Printer1 2 3 4 5Prepare the Printer Install the Printhead Connect the PrinterTo Your ComputerStart HereEasy Setup InstructionsColor Bubble Jet™ PrinterPull the orange tab off the yellow ink tank(BCI-3eY), then remove and discard theplastic wrapper.Twist off and discard the orangeprotective cap.NOTE: To avoid spilling ink, never press onthe sides of an ink tank.Insert the ink tank into the correct slot.(Refer to the color guide on the printhead.)Press down gently until the ink tank locksinto place.Insert the remaining three ink tanks intotheir assigned slots.Close the front cover and attach thepaper rest and output tray.Electrical contactsGently slide the printhead into the holder.The printhead will rest at a slight angle.Do not press it down.Remove the printhead from its package.Turn the printhead over, then removethe orange protective cap.NOTE: Do not touch the electrical contacts.Lower the lock lever and gently pressit down until it locks into place.Raise the gray lock lever.Plug the power cord into the back of theprinter and connect the other end to apower outlet.Open the front cover. The printhead holderautomatically moves to the center. Removethe protective tape.Write down the serial number located tothe right of the printhead. You will needthis later to register the product.Remove the shipping tape from thefront and sides of the printer.Ink TanksBCI-3eC Cyan BCI-3eM MagentaBCI-3eBK Black BCI-3eY YellowPOWERLampPOWERButtonShipping TapeSerial numberProtective tape(IEEE 1284 compliant)Parallel CableFor USB Cables:For Parallel Cables:Parallel PortSecureWire ClipsParallel CableUSB PortUSB CableContinue with Step 6on side two.Turn the printer off.Connect one end of the USB cableto the computer, the other to the printer.Turn the printer off.Connect one end of the parallel cable tothe computer, the other to the printer.IMPORTANT: Be sure printer is offbefore continuing, or the computerwill attempt to install the printerdriver before the printer is ready.IMPORTANT: Be sure printer is offbefore continuing, or the computerwill attempt to install the printerdriver before the printer is ready.Carefully remove all items from the box.Power CordS750 SeriesColor Bubble Jet PrinterDocumentationand Software KitS750 BJ (Bubble Jet) PrintheadPaper RestOutput TrayPress the POWER button.Protective cap1234154312123451221