Install the Ink TanksUnpack the Printer1 2 3 4 5Prepare the Printer Install the Print Head Connect the PrinterTo Your ComputerStart HereEasy Setup Instructions Photo PrinterS900Insert the ink tank into the correct slot.(Refer to the color guide on the print head.)Press down gently until the ink tank locksinto place.Electrical contactsGently slide the print head into the holder.The print head will rest at a slight angle.Do not press it down.Remove the print head from its package.Turn the print head over, then removethe orange protective cap.NOTE: Do not touch the electrical contacts.Lower the lock lever and gently pressit down until it locks into place.Raise the gray lock lever.Plug the power cord into the back of theprinter and connect the other end to apower outlet.Open the front cover. The print head holderautomatically moves to the center. Removethe protective tape.Write down the serial number located tothe right of the print head. You will needthis later to register the product.Serial numberProtective tapePress the POWER button.Remove the shipping tape from thefront and sides of the printer.POWERLampPOWERButtonShipping TapeCarefully remove all items from the box.S900Photo PrinterDocumentationand Software KitPaper RestPull the orange tab off the yellow ink tank(BCI-6Y), then remove and discard theplastic wrapper.Twist off and discard the orangeprotective cap.NOTE: To avoid spilling ink, never press onthe sides of an ink tank.Insert the remaining five ink tanks intotheir assigned slots.Close the front cover, attach the paper restand extend the paper output tray.Protective capInk TanksBCI-6C Cyan BCI-6M MagentaBCI-6BK Black BCI-6Y YellowBCI-6PC Photo Cyan BCI-6PM Photo MagentaPower CordS900 Print HeadUSB PortUSB CableContinue with Step 6on side two.Turn the printer off.Connect one end of the USB cableto the computer, the other to the printer.IMPORTANT: Be sure the printer isoff before continuing, or the computerwill attempt to install the printerdriver before the printer is ready.12341543121234512