Canon DC330 Instruction Manual

Also see for 2689B001 - DC 330 Camcorder: Software guide Instruction manual Instruction manual

Contents

Canon DC330 Instruction Manual Manual pdf 59 page image

Photos • 59Histogram and Other Screen DisplaysWhen viewing still images you candisplay the histogram and the icons ofall the functions used at the time ofrecording. Use the histogram as areference to verify the correct exposureof the still image.The area to the right of the histogramrepresents highlights and the left siderepresents shadows. A still imagewhose histogram skews to the right isrelatively bright; while one whosehistogram peaks to the left, is relativelydark.NOTESThe histogram will appear also afterrecording a still image, while reviewing itwithin the time set for the [REVIEW] option(or immediately after recording it, if[REVIEW] is set to [ OFF]). You canchoose to turn off the histogram bypressing .Repeatedly press to turn the on-screen displays on and off in thefollowing sequence.• All displays on• All displays off1• All displays on• Regular displays only (removes thehistogram and information icons)• All displays off1 However, the markers and the icon andAF frames when the autofocus is locked willstill appear on the screen.Protecting PhotosYou can protect still images recorded onthe memory card from accidentalerasure.[ PROTECT] Press[ PROTECT]: The image selectionscreen appears.1 Select ( ) the still image youwant to protect.2 Press to protect the still image.appears on the bottom bar andthe image cannot be erased. Pressagain to cancel the imageprotection.3 Repeat steps 1-2 to protectadditional images or presstwice to close the menu.IMPORTANTInitializing the memory card ( 60) willpermanently erase all recorded still images,even the protected ones.TO SELECT THE ON - SCREEN DISPLAYSShadowsPixel CountHighlightsDISP.DISP.( 22)FUNC.( 23)FROM THE IMAGE SELECTION SCREENFUNC.FUNC.COPY