65EMacintoshDownloading Still Images/Movies (ImageBrowser)Below explains the procedure for connecting a camcorder to a computer usingthe USB cable.For connecting a PC card reader/writer, see Using a PC Card Reader/Writer (71).❍ Observe following precautions when the camcorder’s card accessindicator is flashing (the camcorder is reading or writing from or tothe memory card). Failure to do so may cause memory card data tobecome corrupted.– Do not remove the memory card or detach the USB cable.– Do not turn off the camcorder or the computer.– Do not change the position of the POWER switch or the TAPE/CARD switch.❍ Format the memory card with the camcorder or from the CameraWindow ( 73).❍ Still images/movies recorded onto the memory card or downloadedto the hard disk are important original data files. Create a copy ofthe file first before working on it on your computer.Starting ImageBrowser1. Insert a memory card containing still images/movies into thecamcorder.2. Connect the Power Adapter to the camcorder.3. Turn the POWER switch to PLAY (VCR) and move the TAPE/CARD switch to CARD.Wait until the card access indicator stops flashing.Mac OS 9.0-9.2
