Canon DR-5060F Instructions Manual

Also see for 5060F - Document Scanner: Instructions

Contents

481 Set up the scanner.2 Set the Start Scanning dialog box.[Separator] settingSet file separator of the image when a patch code sheet is detected.• NoneDoes not separate files even if patch code sheets are detected.• Scan, Continue ScanningSeparates files and continues scanning when the patch code sheet isdetected.At this time, the content of the patch code sheet is recorded as an image.• Skip, Continue ScanningSeparates files and continues scanning when the patch code sheet isdetected.At this time, the content of the patch code sheet is not recorded as an image.• Scan, Stop ScanningStops scanning when the patch code sheet is detected.At this time, the content of the patch code sheet is recorded as an image, andthe file is separated from the image of the patch code sheet.• Skip, Stop ScanningStops scanning when the patch code sheet is detected.At this time, the content of the patch code sheet is not recorded as an image.[2LevelBlip] settingSet the film separator when the patch code sheet is detected.• [2LevelBlip] markedMarks film with a file mark when the New File key is pressed.• [2LevelBlip] not markedDoes not mark film with a file mark when the New File key is pressed.3 Click [Start Scanning] to start scanning.MEMOWhen scanning is set to stop when a patch code is detected, scanning isstopped when a patch code is detected, and the Scanning Canceled dialog boxis displayed.Other Scan Operations