421 Connect the charger to a power outlet.Connect the power cord to thecharger and insert the power plug intoa power outlet.When no battery is attached, all theindicator lamps will be off.2 Remove the protective cover.As shown in the illustration, detachthe charger’s protective cover(provided) and the battery’sprotective cover (provided).3 Recharge the battery.Slide the battery into the charger’sslot as shown by the arrow, and makesure it is securely attached.You can attach the battery to eitherslot or slot .X Charging will start and the chargelamp will blink or light up in green.X When all three charge lamps lightup in green (50%/80%/100%), thecharging is complete.To recharge a fully exhausted battery at room temperature (23 °C/73 °F), it takes approx. 2 hr. 50 min. for the LP-E19 and approx. 2hr. 20 min. for the LP-E4N/LP-E4. (The battery recharge time varieswidely depending on the ambient temperature and the battery’sremaining capacity.)For safety reasons, recharging in low temperatures (5°C - 10°C /41°F - 50°F) will take a longer time (up to approx. 5 hours only whencharging Battery Pack LP-E19).Charging the BatteryIf two batteries are attached to the charger, the battery attached first willbe charged first, then the other battery will be charged.Provided Battery Charger LC-E19 can also charge Battery Pack LP-E4N/LP-E4.
