4-812345Cover/Table ofContentsDownloading Imagesfrom the Camera,and Camera SettingsWorking withImages in theImageBrowserRemote Shooting inthe EOS CaptureTroubleshootingand Uninstallingthe SoftwareIndexSetting the EOS 5Dand EOS-1D SeriesCamerasIntroductionSets the default settings when the button is ONO You can use this function to select the default mode settings when you press the button.O Convenient when you want to instantly switch to frequently-used settings.Shortened release time lagO Normally, the shutter-release time lag is controlled for stability. This Personal Functioneliminates this control. As a result, the shutter-release time lag can be reduced by as muchas about 20 percent when the aperture needs to be stopped down by no more than 3 stops.O This is effective when a shorter shutter-release time lag is more important than a stableshutter-release time lag.O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1DMark II.Enables the electronic dial’s function to be used in the reversedirectionO The electronic dial’s rotational function can be reversed for selecting the AF point andsetting the shutter speed and aperture.O By matching the dial’s rotation direction to the particular operation, the operation can feelmore intuitive.Prevents exposure compensation with the Quick Control DialO The Quick Control Dial cannot be used to set exposure compensation.O This prevents exposure compensation from being set accidentally while the AF point isbeing selected.Since the difference is in 10-millisecond increments, the time lag may not feel anyshorter.When the main dial’s rotational function is reversed, the horizontal AF point selectiondirection does not change.P.Fn-25P.Fn-26P.Fn-27P.Fn-28Enables Quick Control Dial switch to turn on/off Main Dial, tooO Setting the Quick Control Dial switch to disables the Main and Quick Control Dials.O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1DMark II.Enlargement modeO Select which part of an image is enlarged.O If you take the shot on the camera with this function [ON], you can enlarge an image.O For more imformation on using this function on the camera, see “P.Fn-30 Enlarging theimage” in the EOS-1Ds Instruction Manual.O This function is compatible with the EOS-1Ds only.Add original decision dataO The data that shows whether or not the image is the original one can be added to the image.When selecting the display format of Shooting information (INFO), the icon showing thecaptured image with Original image verification data is displayed.For more details, refer to “Shooting Information Display” in the camera’s Instruction Manual.O For the decision of the original image, you will need the dedicated accessory (optional).O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D MarkII and EOS-1Ds.O If you wish to enlarge an image, set P.Fn-30 to [ON] during shooting and playback.The image shot on the camera without setting P.Fn-30 to [ON] cannot be enlarged.O The image shot on any camera other than the EOS-1Ds cannot be enlarged.The original decision data cannot be added to the JPEG or TIFF image converted fromthe RAW image.P.Fn-30P.Fn-30P.Fn-31
