Canon EOS 10D Instruction Manual

Also see for 0206b003 - EOS Digital Rebel XT Camera SLR: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Canon EOS 10D Instruction Manual Manual pdf 6 page image

11-112345Cover/Table ofContentsIntroductionDownloading Imagesfrom the Camera,and Camera SettingsWorking withImages in theImageBrowserRemote Shooting inthe EOS CaptureTroubleshootingand Uninstallingthe SoftwareIndexSetting the EOS 5Dand EOS-1D SeriesCamerasDownloading Images from the Camera, and Camera SettingsThis chapter explains how to set up communication mode, how to connectthe camera or a card reader (third-party product) to your computer, how todownload images, and explains camera settings, etc. For EOS 5D and EOS-1D series camera settings, refer to Chapter 4.For more information on the restrictions of the CameraWindow, refer also to thesource listed below.ReadMe: Double-click the [Canon Utilities] folder X the [CameraWindow] folder X[ReadMe(CameraWindow)]/[ReadMe(CameraWindowDSLR)].O Click on the item to display its page.Connecting the Camera to Your Computer ..................................................... 1-2Downloading Images from Your Camera ......................................................... 1-4Downloading All the Images in a Single Operation.......................................... 1-4Downloading Selected Images ........................................................................ 1-4Camera Settings ................................................................................................. 1-5Downloading Images Using Your Card Reader ............................................... 1-5Downloading JPEG Images Using the PTP Function ..................................... 1-6You can set the camera’s communication mode to [PC connect.], [PC connection] or [Normal].O The settings on this page are only necessary for the EOS 5D, EOS DIGITAL REBELXT/350D DIGITAL, EOS 20D, EOS DIGITAL REBEL/300D DIGITAL and EOS 10D.O With the EOS 10D, you must change the firmware to version 2.0.0 or later. For details onchanging, refer to the Canon web site.About the PTP SettingYou can download JPEG images that use the PTP (Picture Transfer Protocol) function, whenthe camera’s communication mode is set to [Print/PTP] or [PTP] (p.1-6).1 Check that the camera is not connected to the computer and thenset the camera’s power switch to .2 Set the camera’s communication mode to [PC connect.], [PCconnection] or [Normal].O With the EOS 5D, set [ Communication]in menu to [PC connect.].O With the EOS DIGITAL REBEL XT/350DDIGITAL, set [Communication] in menuoption [ ] to [PC connection].O With the EOS 20D and EOS 10D, set[Communication] in menu to [Normal].O With the EOS DIGITAL REBEL/300DDIGITAL, set [Communication] in menuoption [ ] to [Normal].3 Press the < > button to switch the LCD monitor display offand then set the camera’s power switch to .O When setting the communication mode, always ensure that the camera is notconnected to the computer beforehand. Setting the communication mode while thecamera is connected to the computer will cause camera and software malfunctions.O When using the EOS 5D or EOS DIGITAL REBEL XT/350D DIGITAL, EOS Capturecannot be used if the camera’s communication mode is set to [Print/PTP].O When using the EOS 20D, EOS DIGITAL REBEL/300D DIGITAL or EOS 10D, thecamera and the software in the Solution Disk cannot communicate if the camera’scommunication mode is set to [PTP].Setting the Communication ModeOperation window in the EOS 5D