Canon EOS 1300D Instruction Manual

Also see for EOS 1300D: Instruction manual Basic instruction manual Instruction manual

Contents

Canon EOS 1300D Instruction Manual Manual pdf 101 page image

101If the transmission rate drops, the connection is lost, or other problemsoccur when using the wireless functions, try the following correctiveactions. When using indoors, install the device in the room where you areusing the camera. Install the device higher than the camera. Install the device where people or objects do not come between itand the camera. Install the device as close to the camera as possible. In particular,note that during outdoor use in poor weather, rain may absorbradio waves and disrupt the connection.If the transmission rate of a wireless LAN drops because of theinfluence of the following electronic devices, stop using them orestablish a connection further away from them. The camera communicates over wireless LANs via IEEE 802.11b/g/n using radio waves in the 2.4 GHz band. For this reason, thewireless LAN transmission rate may drop if there are Bluetoothdevices, microwave ovens, cordless telephones, microphones, orsimilar devices operating on the same frequency band nearby. If a wireless device on the same frequency band as the camera isused nearby, the transmission rate of the wireless LAN will drop. When connecting multiple cameras to one access point, makesure that the cameras’ IP addresses are different. When multiple cameras are connected to one access point, thetransmission rate drops. When there are multiple IEEE 802.11b/g/n (2.4 GHz band) accesspoints, leave a gap of four channels between each wireless LANchannel to reduce radio wave interference. For example, usechannels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.Wireless Function NotesAccess Point and Antenna Installation LocationNearby Electronic DevicesNotes for Using Multiple Cameras