Canon EOS 1300D Instruction Manual

Also see for EOS 1300D: Instruction manual Basic instruction manual Instruction manual

Contents

Canon EOS 1300D Instruction Manual Manual pdf 64 page image

64To start with, check if the access point supports WPS* that allows easyconnection between Wi-Fi devices.If you do not know if the access point you use is WPS-compatible, referto the access point instruction manual or other documentation.* Wi-Fi Protected Setup When WPS is supportedThe following two connection methods are available. Connectioncan be established easier with WPS (PBC mode).• Connecting via WPS (PBC mode): Perform the operationsdescribed on page 65.• Connecting via WPS (PIN mode): Perform the operationsdescribed on page 68. When WPS is not supported• Connecting to a detected network manually: Perform theoperations described on page 71.Access Point EncryptionThis camera supports the following options for [Authentication] and[Encryption settings]. Therefore, the encryption used by the accesspoint must be one of the following. [Authentication]: Open system, Shared key, or WPA/WPA2-PSK [Encryption settings]: WEP, TKIP, or AESChecking the Type of Access Point If stealth functions of the access point are active, connection maybe disabled. Deactivate stealth functions. When connecting to a network that has a network administrator, ask theadministrator about the detailed setting procedures.If the network you use filters by MAC address, register the MAC address ofthe camera at the access point. The MAC address can be checked on the[General sett.] screen (p.88).