142wPrinting4 Set the printing effects.Set as necessary. If you need not setany printing effects, go to step 5.The screen display may differdepending on the printer.Turn the <5> dial to select the itemon the upper right, then press <0>.If the <e> icon is displayed next to<z>, the printing effects can alsobe adjusted. (p.145)Next, turn the <5> dial to select thedesired printing effect, then press <0>.Item DescriptionEOff Same as the printing characteristics turned “On”. No automaticcorrection will be performed.EOn The image will be printed according to the printer’s standard colors.The image’s Exif data is used to make automatic corrections.EVivid The image will be printed with higher saturation to producemore vivid blues and greens.ENR The image noise is reduced before printing.EVivid+NR Vivid and NR are applied before printing.EFacek Effective in backlit conditions which can make the subject’sface look dark. The face will be brightened for printing.ERed-Eye1 Effective in flash images where the subject has red eye. Thered eye is corrected before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. No automaticcolor adjustments will be applied.zNatural M The printing characteristics are the same as the “Natural” setting. However,this setting enables finer printing adjustments than with “Natural.”EDefault The printing will differ depending on the printer. For details, seethe printer’s instruction manual.
