182By changing the shutter speed or aperture automatically, the camera bracketsthe exposure up to ±3 stops in 1/3-stop increments for three successive shots.This is called AEB. * AEB stands for Auto Exposure Bracketing.1 Hold down the <W> and<o> buttonssimultaneously. (9)X The <h> icon and “0.0” will appearon the top LCD panel.2 Set the AEB range.Turn the <6> or <5> dial to setthe AEB range.“1.0” is the AEB increment, and <N>is the AEB range.3 Take the picture.In the current drive mode, the pictureswill be taken in this sequence:Standard exposure, decreasedexposure, and increased exposure.AEB will not be canceledautomatically. To cancel AEB, set theAEB increment to “0.0”.h Auto Exposure Bracketing (AEB)StandardexposureDecreasedexposureIncreasedexposureDuring AEB shooting, the <A> icon in the viewfinder and the <h> iconon the top LCD panel will blink.If the drive mode is set to <u> or <6>, press the shutter button threetimes for each shot. When <o>, <p>, or <K> is set and youhold down the shutter button completely, the three bracketed shots willbe taken continuously and the camera will automatically stop shooting.When <k> or <l> is set, the three bracketed shots will be takencontinuously after a 10-sec. or 2-sec. delay.You can set AEB in combination with exposure compensation.If the AEB range exceeds ±3 stops, the end of the exposure levelindicator will display <I/ > or <J/ >.AEB cannot be set for bulb exposures or used with flash.AEB will be canceled automatically when you set the power switch to<2> or when the flash is ready to fire.COPY
