320d Transferring Images to a Personal Computer3 Set the camera’s power switch to<1>.When the personal computer promptsyou to select a program, select [EOSUtility].X The EOS Utility screen will appear onthe personal computer.For RAW+JPEG images, you can specifywhich image to transfer. On the nextpage in step 2, select [RAW+JPEGtransfer], and select the images to betransferred: [JPEG only], [RAW only], or[RAW+JPEG].3 Transferring RAW+JPEG ImagesAfter the EOS Utility screen appears, do not operate EOS Utility. If anyscreen other than EOS Utility’s top screen is displayed, [Direct transfer] instep 5 on page 322 will not be displayed. (The image transfer function willnot be available.)If the EOS Utility screen does not appear, refer to the SoftwareInstruction Manual (CD-ROM, p.428).Before disconnecting the cable, turn off the camera. Hold the plug (notthe cord) to pull out the cable.You can also transfer images to an ftp server via a wired LAN connectedto the Ethernet RJ-45 terminal (p.21). For details, refer to the separate“Wired LAN Instruction Manual.”The [RAW+JPEG transfer] setting will change automatically in relation withthe setting for [Communication settings] → [Network settings] → [Setup] → [Transfer type/size] → [RAW+JPEG transfer].COPY
