3-39Working with Images in File Viewer Utility● You can specify the settings shown below in the [General Settings] tab sheet.1 When you click the [Transfer Images] button (➞3-4, 3-44), the retouching software (third-party product) to which the image will be transferred is specified. (➞3-42)2 Specify the folder for saving the image to be transferred to the retouching software. (➞3-42)3 Specify the information to be displayed below images. Select [File Name] or [ShootingDate/Time] in the list box.4 You can add or erase model-specific processing modes to be displayed in the [Model-specific processing mode] list box (➞3-3, 3-7). You can add the model-specific processingmode if you click the checkbox of the camera to be added and click the [OK] button on the[Select model-specific processing mode] dialog box displayed by clicking the [Select] button.If you clear the checkbox, the model-specific processing mode is erased.Specifying the PreferencesYou can use the procedure below to specify the general settings for File Viewer Utility and theprocessing method for RAW images.1 Click the [Preferences] button.\ The [Preferences] dialog boxappears.12342 Select the [General Settings] tab or the [RAW Image Processingsettings] tab.\ The selected tab sheet appears.3 Specify the desired settings and then click the [OK] button.\ The settings are applied and the [Preferences] dialog box closes to end theprocedure.General Settings tab sheet
