4-21Specifying Camera Settings from Your ComputerPersonal Function SettingsChecking, Saving, and Loading Personal Function SettingsUse the procedure below to check the details of the Personal Functions that have been set up.You can also save the settings on your computer and then load the saved settings and applythem to the camera.Checking the Settings1 Select the [Combination] tab.\ The [Combination] tab sheet is displayed.● You can use this tab sheet to check the Personal Function parameters currently seton your computer and check whether they have been applied to the camera.2 If the data has not been applied, click either the [OK] button orthe [Apply] button as required.● Clicking the [OK] button applies the specified settings to the camera and closes the[Personal Function Settings] dialog box to end the procedure.● Clicking the [Apply] button applies the specified settings to the camera withoutclosing the [Personal Function Settings] dialog box.Clicking the [Load Settings] button replaces the settings with the Personal Functionsettings on the camera.
