Canon EOS 20Da Instruction Manual

Also see for PowerShot SX1 IS: Software guide Software guide User manual Software user's guide Software guide

Contents

Canon EOS 20Da Instruction Manual Manual pdf 80 page image

7912345IntroductionContents ata GlanceBasicOperationAdvancedOperationAdvancedImage Editingand PrintingEditingJPEG/TIFFImagesIndexProcessingLarge Numbersof ImagesReferenceYou can specify settings for the tool palette.O Default settings of RGB Tone curve modeYou cannot apply changes to the settings until you re-open the folder.Even if the default setting is changed, the new default setting is notapplied to edited (i.e., adjusted using the tool palette, trimmed, dust-erased) images. Change each one individually.Changes are not applied to the edited imageTool Palette O Modified Picture Style settingsYou can select whether the [Color tone], [Color saturation], [Contrast],[Unsharp mask] and [Sharpness] settings will be changed or retained,when you change the Picture Style.O If you checkmark the checkbox, the [Color tone], [Color saturation],[Contrast] and [Sharpness] settings will be changed to match thecamera’s preset settings, when you change the Picture Style.O If you remove the check mark, the [Color tone], [Color saturation],[Contrast] and [Sharpness] settings will be retained, even if youchange the Picture Style.O Default noise reduction settingsYou can set a default beforehand for the noise reduction level.RAW Images• When [Apply camera settings] is selected, you can pre-set a noisereduction level that suits the camera settings beforehand as thedefault.• When [Set as defaults] is selected, you can pre-set a preferreddefault setting for the noise reduction level beforehand.JPEG/TIFF Images• You can set a desired default noise reduction level beforehand.For images not having a recipe attached, the default set here for noisereduction level is applied. However, if you want to apply settings toimages in the opened folder, you need to re-open the folder after makingsettings here. For images with a recipe attached, the noise levelrecorded in the recipe remains as it is and the default for noise reductionlevel set here is not applied.In instances where the same level of noise occurs in several images,such as images shot with high ISO speed, setting an appropriate defaultnoise reduction setting enables you to apply a batch noise reductiondefault to all the images displayed in DPP (excluding images with arecipe attached). This eliminates the need to apply noise reduction toeach individual image. And, since you always shoot with the sameconditions, it is also useful when you want to set the same noisereduction level for all shot images.Advantages of setting a noise reduction defaultCOPY