3 Selecting the Images to be Transferred160Do not insert into the camera a CF card whose transfer order were set by a differentcamera and then try to specify a transfer order. The selected images might all beoverwritten. Also, depending on the image type, the transfer order may not be possible.For the transfer order, if you select an image captured in the RAW+JPEGmode, it will be counted as one image. During the direct image transfer, boththe RAW and JPEG images will be transferred to the personal computer.Preparation for Image TransferBefore connecting the camera to the personal computer, be sure to first installthe EOS DIGITAL Solution Disk software (in the CD-ROM provided with thecamera) to the personal computer. If you connect the camera to the personalcomputer before installing the software, the personal computer will notrecognize the camera properly and the images cannot be transferred.Install the software to thepersonal computer.Refer to the separate Software Guide toinstall the software to the personal computer.1 Select [Communication].Turn the <5> dial to select [cCommunication], then press <0>.2 Select [Print/PC].Turn the <5> dial and select [Print/PC], then press <0>.Installing the SoftwareCamera SettingsIf [Communication] is set to [LAN (WFT-E1)], the personal computer will notbe able to recognize the camera.
