102By changing the shutter speed or aperture automatically, the camerabrackets the exposure up to ±2 stops in 1/3-stop increments for threesuccessive shots. This is called AEB.1 Select [Expo. comp./AEB].Under the [2] tab, select [Expo.comp./AEB], then press <0>.2 Set the AEB amount.Turn the <6> dial to set the AEBamount.You can set the exposure compensationamount with the <5> dial. If AEB iscombined with exposure compensation,AEB will be applied centering on theexposure compensation amount.Press <0> to set the amount.X When you exit the menu, <h> and the AEBlevel will be displayed on the LCD panel.3 Take the picture.Focus and press the shutter buttoncompletely. The three bracketed shots willbe taken in this sequence: Standard,decreased, and increased exposure.Follow steps 1 and 2 to turn off the AEB amount display.AEB will be canceled automatically when you set the power switchto <2> or when the flash is ready to fire.3 Auto Exposure Bracketing (AEB)NAEB amountCanceling AEBIf the drive mode is set to <u>, you must press the shutter button threetimes. When <o> or <i> is set and you hold down the shutter buttoncompletely, the three bracketed shots will be taken continuously. Thenthe camera will stop shooting. When <j> or <l> is set, the threebracketed shots will be taken after a 10-sec. or 2-sec. delay.Neither flash nor bulb exposures can be used with AEB.COPY
