Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Also see for 0206b003 - EOS Digital Rebel XT Camera SLR: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Canon EOS 5D - Focusing Screen Ee-A Instruction Manual Manual pdf 11 page image

1-612345Cover/Table ofContentsDownloading Imagesfrom the Camera,and Camera SettingsWorking withImages in theZoomBrowser EXRemote Shooting inthe EOS CaptureTroubleshootingand Uninstallingthe SoftwareIndexSetting the EOS 5Dand EOS-1D SeriesCamerasIntroductionDownloading JPEG Images Using the PTP Function Cameras other than EOS-1D Series Cameras(EOS 5D and EOS DIGITAL REBEL XT/350D DIGITAL etc.)When using Windows XP, you can use the PTP (Picture Transfer Protocol) function. If youset the camera’s communication mode to [Print/PTP] or [PTP], you can download JPEGimages saved on a memory card in the camera to your computer without having to startthe software provided on the Solution Disk.O This function is compatible with the EOS 5D, EOS DIGITAL REBEL XT/350DDIGITAL, EOS 20D, EOS DIGITAL REBEL/300D DIGITAL and EOS 10D only.O With the EOS 10D, you must change the firmware to version 2.0.0 or later. For detailson changing, refer to the Canon web site.1 Check that the camera and the computer are not connected andthen set the camera’s power switch to .2 Set the camera’s communication mode to [Print/PTP] or [PTP].O With the EOS 5D, set [ Communication]in menu to [Print/PTP].O With the EOS DIGITAL REBEL XT/350DDIGITAL, set [Communication] in menuoption [ ] to [Print/PTP].O With the EOS 20D and EOS 10D, set[Communication] in menu to [PTP].O With the EOS DIGITAL REBEL/300DDIGITAL, set [Communication] in menuoption [ ] to [PTP].3 Press the < > button to switch the LCD monitor display offand then set the camera’s power switch to .4 Connect the camera to the computer and set the camera’s powerswitch to (p.1-2) .¿ The window for selecting the software to use for downloading the images isdisplayed.5 Select [Microsoft Scanner and Camera Wizard] and click the [OK]button.¿ The [Scanner and Camera Wizard] dialog box appears.6 Download images as directed in the [Scanner and Camera Wizard]dialog box. EOS-1D Series Cameras(EOS-1D Mark II N and EOS-1Ds Mark II etc.)If you are using Windows XP, you can connect the USB interface cable supplied with thecamera to the camera’s direct print terminal and download to your computer JPEG imagessaved on the memory card inside your camera using the PTP (Picture Transfer Protocol)function, without having to start the software provided on the Solution Disk.O If you want to use the PTP function, connect with the USB interface cable supplied withthe camera.O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1DMark II only.1 Plug the dedicated cable into the computer.O Plug the cable into the USB port.O Refer to the computer User’s Manual forinformation on the terminal areas.2 Plug the dedicated cable into your camera.O Face the plug’s < > mark towards thebottom of the camera and then connectthe plug to the camera’s direct printterminal.3 Set the camera’s power switch to .¿ The window for selecting the software to use for downloading the images isdisplayed.4 Select [Microsoft Scanner and Camera Wizard] and click the [OK]button.¿ The [Scanner and Camera Wizard] dialog box appears.5 Download images as directed in the [Scanner and Camera Wizard]dialog box.