176wPrinting4 Set the printing effects.Set as necessary. If you need not setany printing effects, go to step 5.The screen display may differdepending on the printer.Select the option on the upper right,then press <0>.Select the desired printing effect withthe dial, then press <0>.If the <e> icon is displayed next to<z>, you can also adjust theprinting effect (p.178).* When you change the printing effects, it is reflected in the image displayed onthe upper left. Note that the printed image might look slightly different from thedisplayed image which is only an approximation. This also applies to[Brightness] and [Adjust levels] on page 178.Item DescriptionEOnThe image will be printed according to the printer’s standardcolors. The image’s Exif data is used to make automaticcorrections.EOff No automatic correction will be performed.EVivid The image will be printed with higher saturation to producemore vivid blues and greens.ENR The image noise is reduced before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. Noautomatic color adjustments will be applied.zNatural MThe printing characteristics are the same as the “Natural”setting. However, this setting enables finer printingadjustments than with “Natural.”EDefault The printing will differ depending on the printer. For details,see the printer’s instruction manual.COPY
