212You can check the battery’s condition on the LCD monitor. The BatteryPack LP-E6 has a unique serial No., and you can register multiplebattery packs to the camera. When you use this feature, you can checkthe registered battery pack’s remaining capacity and operation history.Select [Battery info.].Under the [7] tab, select [Batteryinfo.], then press <0>.X The battery info screen will appear.3 Checking the Battery InformationModel of the battery or household powersource being used.Remaining battery capacity displayed by thebattery check display (p.28) in 1% increments.Shutter count or shots taken with thecurrent battery. The number is reset whenthe battery is recharged.Battery’s recharge performance level isdisplayed in one of three levels.(Green): Battery’s rechargeperformance is fine.(Green): Battery’s recharge performanceis slightly degraded.(Red): Purchasing a new battery isrecommended.Battery positionDo not use any battery other than the Battery Pack LP-E6. Otherwise, thecamera’s full performance may not be attained or malfunction can result.If you use two LP-E6 battery packs in the Battery Grip BG-E6, batteryinformation for the two battery packs will appear.When size-AA/LR6 batteries are used in the Battery Grip BG-E6, onlythe battery check display will be displayed.If for some reason, communication with the battery is not successful, thebattery check display will show < > on the LCD panel and in theviewfinder. [Cannot communicate with battery] will be displayed. Justselect [OK] and you can continue shooting.COPY
