85Single and continuous drive modes are provided. In the <1> (FullAuto) mode, single shooting is set automatically.1 Press the <o> button. (9)2 Select the drive mode.While looking at the LCD panel, turnthe <5> dial.u : Single shootingWhen you press the shutter button completely, one shot will be taken.i : Continuous shooting (Max. 3.9 shots per sec.)While you press the shutter button completely, shots will be takencontinuously.Q : 10-sec. self-timer/Remote controlk: 2-sec. self-timer/Remote controlFor self-timer shooting, see the next page. For remote controlshooting, see page 102.i Selecting the Drive ModeNWhen the internal buffer memory becomesfull during continuous shooting, “buSY” willbe displayed in the viewfinder and on theLCD panel and shooting will be disabledtemporarily. As the captured images are recorded to the card, you will beable to shoot more images. Press the shutter button halfway to check inthe viewfinder’s bottom right for the current maximum burst. This is themaximum number of shots that can be taken continuously.If “FuLL CF” is displayed in the viewfinder and on the LCD panel, waituntil the access lamp stops blinking, then replace the card.When the battery level is low, the continuous shooting speed will beslightly slower.In the AI Servo AF mode, the continuous shooting speed may becomeslightly slower depending on the subject and the lens used.Maximum burstCOPY
