148When a connection error occurs, display the details of the error byfollowing one of the procedures below. Then, eliminate the cause of theerror referring to the examples shown in this chapter. On the [View info] screen, press <0> (p.144). Select [Error details] on the [Wi-Fi on] screen, then press <0>.Click the error code number’s page in the following chart to jump to thecorresponding page.If [Waiting to retry transfer...] is displayedIf the screen on the left is displayed,image transfer to an FTP server hasfailed. Check the error code number andeliminate the cause of the error.Once the cause of the error is eliminated,the images whose transfer previouslyfailed will be retransferred automatically.Note that when you cancel image transferor turn off the camera, the image will notbe retransferred automatically. See page119 and transfer the image.Responding to Error Messages11 (p.149) 12 (p.149)21 (p.150) 22 (p.151) 23 (p.152) 24 (p.152)41 (p.154) 42 (p.156) 43 (p.156) 44 (p.156) 45 (p.157)46 (p.158) 47 (p.158)61 (p.159) 62 (p.159) 63 (p.160) 64 (p.160) 65 (p.161)66 (p.161) 67 (p.161) 68 (p.162) 69 (p.162)91 (p.162)121 (p.163) 122 (p.163) 123 (p.163) 124 (p.163) 125 (p.164)126 (p.164) 127 (p.164)141 (p.164) 142 (p.164)When an error occurs, [Err**] is displayed on the upper right of the [Wi-Fifunction] screen. It disappears when the camera’s power is set to <2>.
