206You can edit out the first and last scenes of a movie in 1-sec. increments.1 On the movie playback screen,select [X]. The editing screen will be displayed.2 Specify the part to be edited out. Select either [U] (Cut beginning) or[V] (Cut end), then press <0>. Press the <U> key to fast forward or turnthe <5> dial (next frame) to specify thepart to be edited out, then press <0>. After deciding which part to edit out, press<0>. The portion highlighted in blue onthe top of the screen is what will remain.3 Check the edited movie. Select [7] and press <0> to playbackthe portion highlighted in blue. To change the editing, go back to step 2. To cancel the editing, select [2] andpress <0>.4 Save the movie. Select [W], then press <0>. The save screen will appear. To save it as a new movie, select[New file]. To save it and overwritethe original movie file, select[Overwrite]. Then press <0>.X Editing the Movie’s First and Last Scenes Since the editing is done in 1-sec. increments (position indicated by[X]), the exact position where the movie is edited may differ slightly fromthe position you specified. If the card does not have enough room, [New file] will not be selectable. More movie editing functions are available with ZoomBrowser EX/ImageBrowser (provided software).
