243wPrintingYou can crop the image and print onlythe trimmed portion as if the image wasrecomposed. Do the trimming rightbefore printing. If you set the trimmingand then set the print settings, you mayhave to set the trimming again.1 On the print setting screen, select [Trimming].2 Set the trimming frame size, position, and aspect ratio. The image area within the trimming frame will be printed. Thetrimming frame’s aspect ratio can be changed with [Paper settings].Changing the trimming frame sizeWhen you press the <u> or <I> button, the size of thetrimming frame will change. The smaller the trimming frame, thelarger the image magnification will be for printing.Moving the trimming frameUse <9> to move the frame over the image vertically or horizontally.Move the trimming frame until it covers the desired image area.Rotating the frameEach time you press the <B> button, the trimming frame willswitch between the vertical and horizontal orientations. This enablesyou to create a vertical-oriented print from a horizontal image.Image tilt correctionBy turning the <6> dial, you can adjust the image tilt angle up to±10 degrees in 0.5-degree increments. When you adjust theimage tilt, the <O> icon on the screen will turn blue.3 Press <0> to exit the trimming. The print setting screen will reappear. You can check the trimmed image area on the upper left of theprint setting screen.Trimming the ImageTilt correction
