226R Processing RAW Images with the CameraNBrightnessYou can adjust the image brightness up to ±1 stop in 1/3-stopincrements. The displayed image will reflect the setting’s effect.White balance (p.96)You can select the white balance. If you select [P], use the <6>dial to set the color temperature. The displayed image will reflect thesetting’s effect.Picture Style (p.90)You can select the Picture Style. To set the parameters such asSharpness, press <0> to display the setting screen. Turn the <5>dial to select a parameter, then turn the <6> dial to set it asdesired. Press <0> to finalize the setting and to return to thesetting screen. The displayed image will reflect the setting’s effect.Auto Lighting Optimizer (p.101)You can set the Auto Lighting Optimizer. The displayed image willreflect the setting’s effect.High ISO speed noise reduction (p.254)You can set the noise reduction for high ISO speeds. The displayedimage will reflect the setting’s effect. If the effect is difficult to discern,press the <u> button to magnify the image. (Press the <I>button to return to the normal view.)To check the effect of the [Strong] setting, magnify the image.Viewing it as a single image will only display the [Standard] effecteven if [Strong] was set.Image-recording quality (p.84)You can set the pixel count and image quality of the JPEG image tobe saved when converting the RAW image. The image sizedisplayed, such as [8.0M 3456x2304], has a 3:2 aspect ratio. Thepixel count of each aspect ratio is indicated on page 223.RAW Image-processing OptionsCOPY
