241wPrinting5 Set the date and file numberimprinting.Set as necessary.Select <I>, then press <0>.Set as desired, then press <0>.6 Set the number of copies.Set as necessary.Select <R>, then press <0>.Set the number of copies, then press<0>.7 Start printing.Select [Print], then press <0>.With Easy printing, you can print another image using the same settings.Just select the image and press the <l> button. With Easy printing, thenumber of copies will always be 1. (You cannot set the number ofcopies.) Also, any trimming (p.243) will not be applied.The [Default] setting for printing effects and other options are theprinter’s own default settings as set by the printer’s manufacturer. Seethe printer’s instruction manual to find out what the [Default] settings are.Depending on the image’s file size and image-recording quality, it maytake some time for the printing to start after you select [Print].If image tilt correction (p.243) has been applied, it may take longer toprint the image.To stop the printing, press <0> while [Stop] is displayed, then select[OK].If you execute [Clear all camera settings] (p.51), all the settings willrevert to the default.COPY
