1283 Lens Peripheral Illumination / Chromatic Aberration Correction1 Select the setting. Check that [Correction dataavailable] is displayed for theattached lens. Select [Chromatic aberration], thenpress <0>. Select [Enable], then press <0>. If [Correction data not available] isdisplayed, see “About the LensCorrection Data” on the next page.2 Take the picture. The image will be recorded with thechromatic aberration corrected.Chromatic Aberration Correction With [Enable], the maximum burst for continuous shooting will greatlydecrease. If you play back a RAW image shot with the chromatic aberrationcorrected, the image will be displayed on the camera without thechromatic aberration correction applied. Check the chromatic aberrationcorrection with Digital Photo Professional (provided software, p.350).www.devicemanuals.eudisplayed, see “About the Lenswww.devicemanuals.eudisplayed, see “About the LensCorrection Data” on the next page.www.devicemanuals.euCorrection Data” on the next page.Take the picture.www.devicemanuals.euTake the picture.The image will be recorded with thewww.devicemanuals.euThe image will be recorded with thewww.devicemanuals.euchromatic aberration corrected.www.devicemanuals.euchromatic aberration corrected.
