32Installing and Removing the Card1 Open the cover. Set the power switch to <2>. Make sure the access lamp is off,then open the cover. If [Recording...] is displayed, closethe cover.2 Remove the card. Gently push in the card, then let go toeject it. Pull the card straight out, then closethe cover.Removing the CardAccess lamp When the access lamp is lit or blinking, it indicates that images arebeing written to or read by the card, being erased, or data is beingtransferred. Do not open the card slot cover during this time. Also,never do any of the following while the access lamp is lit orblinking. Otherwise, it can damage the image data, card, or camera.• Removing the card.• Removing the battery.• Shaking or banging the camera around. If the card already contains recorded images, the image number may notstart from 0001 (p.204). If a card-related error message is displayed on the LCD monitor, removeand reinsert the card. If the error persists, use a different card.If you can transfer all the images on the card to a computer, transfer allthe images and then format the card with the camera (p.48). The cardmay then return to normal. Do not touch the card’s contacts with your fingers or metal objects.www.devicemanuals.euGently push in the card, then let go towww.devicemanuals.euGently push in the card, then let go toPull the card straight out, then closewww.devicemanuals.euPull the card straight out, then closethe cover.www.devicemanuals.euthe cover.www.devicemanuals.euWhen the access lamp is lit or blinking, it indicates that images arewww.devicemanuals.euWhen the access lamp is lit or blinking, it indicates that images arebeing written to or read by the card, being erased, or data is beingwww.devicemanuals.eubeing written to or read by the card, being erased, or data is beingtransferred. Do not open the card slot cover during this time. Also,www.devicemanuals.eutransferred. Do not open the card slot cover during this time. Also,never do any of the following while the access lamp is lit orwww.devicemanuals.eunever do any of the following while the access lamp is lit or
