120White balance (WB) is for making the white areas look white. Normally,the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the whitebalance to match the light source or set it manually by shooting a whiteobject.In Basic Zone modes, <Q> is set automatically.1 Select [White balance].Under the [z3] tab, select [Whitebalance], then press <0>.2 Select the white balance.Select the desired setting, then press<0>.* Applicable with Speedlites having a color temperature transmission function.Otherwise, it will be fixed to approx. 6000K.To the human eye, a white object looks white regardless of the type oflighting. With a digital camera, the color temperature is adjusted withsoftware to make the white areas look white. This adjustment serves asthe basis for the color correction. With this function, pictures with naturalcolor shades can be taken.3 Setting the White BalanceNDisplay Mode Color Temperature (Approx. K: Kelvin)Q Auto 3000 - 7000W Daylight 5200E Shade 7000R Cloudy, twilight, sunset 6000Y Tungsten light 3200U White fluorescent light 4000D Flash use Automatically set*O Custom (p.121) 2000 - 10000P Color temperature (p.122) 2500 - 10000About White Balance
