293w PrintingYou can crop the image and print onlythe trimmed portion as if the image wasrecomposed.Set the trimming right before printing.If you set the trimming and then set theprint settings, you may have to set thetrimming again before printing.1 On the print settings screen, select [Trimming].2 Set the trimming frame size, position, and aspect ratio.The image area within the trimming frame will be printed. Thetrimming frame’s aspect ratio can be changed with [Paper settings].Changing the trimming frame sizeTurn the <6> dial to change the trimming frame size. The smaller thetrimming frame, the larger the image magnification will be for printing.Moving the trimming frameUse <9> to move the frame over the image vertically orhorizontally. Move the trimming frame until it covers the desiredimage area.Rotating the framePressing the <B> button will toggle the trimming frame betweenthe vertical and horizontal orientations. This enables you to create avertically oriented print from a horizontal image.Image tilt correctionBy turning the <5> dial, you can adjust the image tilt angle up to±10 degrees in 0.5-degree increments. When you adjust the imagetilt, the <O> icon on the screen will turn blue.3 Press <0> to exit the trimming.X The print settings screen will reappear.You can check the trimmed image area on the upper left of theprint settings screen.Trimming the ImageTilt correction
