202Live View Shooting CautionsLive View ImageUnder low- or bright-light conditions, the Live View image may not reflectthe brightness of the captured image.If the light source (illumination) within the image changes, the screenmay flicker. If this happens, exit Live View shooting and resume shootingunder the actual light source.If you point the camera to a different direction, it may throw off the LiveView image’s correct brightness momentarily. Wait until the brightnesslevel stabilizes before shooting.If there is a very bright light source in the picture, the bright area mightappear black on the LCD monitor. However, the actual captured imagewill correctly show the bright area.In low light, if you set the [52: LCD brightness] to a bright setting, noiseor irregular colors may appear in the Live View image. However, thenoise or irregular colors will not be recorded in the captured image.When you magnify the image, the image sharpness may look morepronounced than in the actual image.Custom FunctionsFor Live View shooting, certain Custom Function settings will not takeeffect (p.303).Lens and FlashThe focus preset function is possible for Live View shooting only whenusing a (super) telephoto lens equipped with the focus preset modemarketed since the second half of 2011.FE lock and modeling flash will not work if an external Speedlite is used.COPY
