2073 Auto Exposure BracketingN Follow steps 1 and 2 to turn off the AEB range display (set to 0). The AEB setting will also be canceled automatically if the powerswitch is set to <2>, flash recharging is complete, etc. Using AEB with continuous shootingIf you set the drive mode to <o> or <i> (p.147) and press theshutter button completely, the three bracketed shots will be takenconsecutively in the sequence of standard exposure, decreasedexposure, and increased exposure, and then the camera willautomatically stop shooting. Using AEB with single shooting (u)Press the shutter button three times to take the three bracketedshots. The three bracketed shots will be taken in the followingsequence: standard exposure, decreased exposure, and increasedexposure. Using AEB with the self-timer or a remote controller (soldseparately)With the self-timer or a remote control shooting (<Q> or <l>),you can take three consecutive shots after a 10-sec. or 2-sec. delay.With <q> (p.149) set, the number of consecutive shots will bethree times the number set.Canceling AEBShooting Tips During AEB, <A> and AEB range in the viewfinder will blink. AEB cannot be used with flash, when [Multi Shot Noise Reduction] isset, for shooting with a Creative filter, or with bulb exposures. If [z2: Auto Lighting Optimizer] (p.175) is set to any setting other than[Disable], the effect of AEB may be reduced.
