Start HereEasy Setup InstructionsaUnpacktheMachine.Confirm the included items against the illustration printedon the lid of the packing box.bOpen the Cover and remove the protectivematerials.NoteThe actual protective materials may differ in shape, quantity, andposition from the ones shown in the illustration above.cConnect the Handset to the jack, and place it inits cradle.There is a grooveon the bottom of themachine to hold theHandset Cord.dConnect the telephone line and any necessaryexternal device.For more details, see “Step 5” on the back ofthis sheet.Connect the telephoneline cord to the wall jack.You can connectan external device(telephone or answeringmachine) if necessary.ImportantBe sure to use supplied telephone line cable.1Prepare the MachineaLift the Cover until it locks into place.bWhen the Cover is opened, the Holder will moveto the left.CautionDo not touch internal parts other than the Holder.cPrepare the FINE Cartridge.Remove theFINE Cartridgefrom its package.Remove the protective tape.When doing so,DO NOT TOUCHthe metallic areas.ePlug the power cord into the back of themachine and connect the other end to a poweroutlet.fPress [ON], wait until the LCD displays[Start/Copy].SELECT LANGUAGEPress [Start/Copy].gUse [{] or [}] on the Operation Panel to selectthe language for the LCD, then press[Start/Copy].Press [Start/Copy].2Install the FINE CartridgedInsert the FINE Cartridge slightly slanted into theHolder.ImportantMake sure the machine is turned on and [ON] lights green.Make sure the Holder has moved to the left.ePush up the FINE Cartridge until it clicks intoplace.ImportantIf the Holder moves to the right side, close and reopen theCover to return the Holder to the left.DO NOTput the head of the FINECartridge downward into the Holder.fClose the Cover.Wait until the preparationoperation is completed: this takesabout one to two minutes.Before using your machine, enter the dateand time correctly. For details, refer to“Entering the Date and Time” in “BeforeUsing Your Machine” of theUser’s Guide.NoteIf an error message is displayed on the LCD, refer to “LCDMessages” in “Troubleshooting” of theUser’s Guide.The machine may make some operating noises when preparingto print. This is normal operation.••••ImportantWhen cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in “Routine Maintenance” of theUser’s Guide.aOpen the Document Cover and extend thePaper Support to support the paper.bSqueeze, then slide the Paper Guide to the left.cTap the edge of the stack on a flat surface toeven the stack.dInsert the stack face up into the Rear Tray,and align the right edge of the stack with theright side of the Rear Tray. Then slide the PaperGuidesnugly against the left edge of thestack.Be careful not to press the Paper Guide strongly againstthe stack, or the paper will not be fed properly.3Loading PaperTurn OverFor the instructions for Setting ReceiveMode, Connecting the Machine, andSoftware Installation.NotePlease note that the illustrations of the fax in this guide may differ from your model.