Start HereEasy Setup InstructionsStart HereEasy Setup InstructionsUnpack the MachineQT5-0849-V03a Open the Printer Cover and remove the protective materials.NoteThe actual protective materials may differ in shape, quantity, and position from the onesshown in the illustration above.b Connect the Handset to the jack, and place it in its cradle.There is a grooveon the bottom of themachine to hold thehandset cord.c Connect the telephone line and any necessary external device.For more details, see “Step 5” on the back of this sheet.Connect the telephoneline cord to the wall jack.You can connectan external device(telephone or answeringmachine) if necessary.ImportantBe sure to use supplied telephone line cable.d Plug the power cord into the back of the machine and connectthe other end to a power outlet.1 Prepare the Machinea Lift the Printer Cover until it locks into place.b When the Printer Cover is opened, the Cartridge Holder willmove to the left.c Prepare the FINE Cartridge.Remove theFINE Cartridgefrom its package.Remove the protective tape.When doing so, DO NOT TOUCHthe metallic areas.DO NO TOUCH.e Press [ON/OFF].Press [Start/Copy].f Use [{] or [}] on the Operation Panel to select the languagefor the LCD, then press [Start/Copy].Press [{] or [}] to select the language.Press [Start/Copy].2 Install the FINE Cartridged Insert the FINE Cartridge slightly slanted into the CartridgeHolder.e Push up the FINE Cartridge until it clicks into place.DO NOT put the head of the FINE Cartridge downwardinto the Cartridge Holder.f Close the Printer Cover.Wait until the preparationoperation is completed: this takesabout one to two minutes.• Please confirm the included items against the illustration printed on the lid of the packing box.Turn OverFor the instructions for Loading Paper,Setting RECEIVE Mode, Connecting theMachine, and Replacing the Cartridge.ImportantWhen cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the User’s Guide.