|
62Specifying the Double-Sided Document FormatYou can set the document format to scan double-sided documents automatically.1 Place your documents in the feeder (→p.20).2 Switch to the Fax mode (→p.16).3 Press [▲] or [▼] to highlight <2-Sided Original>, and then press [OK].4 Press [▲] or [▼] to highlight the desired option, and then press [OK]. Read only one side of documents.• Read both sides of documents.• Select when the document is abook type.• Read both sides of documents.• Select when the document iscalendar type.5 Send a fax to the desired destination (→p.63).Changing the Default SettingsYou can change the default settings that is applied when the machine is restarted, [ ](Reset) is pressed or the screen is returned to the default screen after auto screen isperformed.1 Press [ ] (Menu).2 Press [▲] or [▼] to highlight , and then press [OK].3 Press [▲] or [▼] to highlight , and then press [OK].4 Press [▲] or [▼] to highlight , and then press [OK].5 Press [▲] or [▼] to highlight the desired option, and then press [OK]. Make the resolution higher or lower. Make the density lighter or darker.<2-Sided Original> Set whether to read one side of documents or both sides ofdocuments automatically. Emphasize the outline of the image or decrease thecontrast.6 Specify the desired setting.7 After you have specified the setting, press [▲] or [▼] to highlight, and then press [OK].8 Press [ ] (Menu) to close the screen.Downloaded from ManualsPrinter.com Manuals PreviousNext |