2The GPS Receiver GP-E2 can geotag your shots and record the routeyou travel. You can view shooting locations and the route traveled in MapUtility (GP-E2 software, p.29). The receiver can also set the camera time.Before use, check whether your camera menu displays [GPS devicesettings].Cameras that display the settingsThe functions described in thismanual are supported by the receiver.(With certain cameras, somefunctions cannot be used.)Cameras that do not display thesettingsGeotagging images (and addingdirection information) is not supportedwhile shooting.Only the logging function (<LOG>mode) is available. To geotag images,you can import log files to Map Utility(GP-E2 software, p.29).EOS 5D Mark III and EOS 7D UsersIf [GPS device settings] is not displayed on your EOS 5D Mark III orEOS 7D camera, update the camera firmware to a version compatiblewith the receiver. The menu item will be displayed after you update thefirmware.For details, contact a Canon Service Center.IntroductionBefore UseExample of menu displayWith the EOS 7D, you cannot append the shooting direction data to theimages. (It cannot use the receiver’s digital compass.)With certain cameras other than the EOS 7D, you also cannot appendthe shooting direction data to the images. (They cannot use thereceiver’s digital compass.) For details, refer to the camera’s instructionmanual or Canon Web site.