Playback28During the playback of HDV recordings: Eventhough their icons will appear on screen, thefollowing special playback modes are notavailable.- Reverse slow playback- Frame reverse- Double speed playback (forward or reverse)To protect the tape and video heads, thecamcorder will enter the stop mode ( ) if left inplayback pause ( ) mode for 4 minutes 30seconds. To resume the playback press .Adjusting the Volume: Speaker andHeadphonesThe camcorder plays the sound with thebuilt-in speaker. When you’re using theviewfinder for playback, you can connecta pair of headphones to listen to thesound. You can also use the headphonesto check the audio level while recording.Adjusting the Volume of the Speaker1 If the joystick guide does not appearon screen, press ( ) to display it.2 Push the joystick ( ) towardor to adjust the volume.• To turn off the volume completely,keep pressing ( ) until the volumeicon changes to .• You can press ( ) again to hide thejoystick guide during playback.Using HeadphonesThe headphones are connected to theAV/ terminal, which is used for both theheadphones and the audio/video output.Before connecting the headphones,follow the procedure below to change thefunction of the terminal from AV output to(headphones) output and make surethe icon appears on the screen. Default value1 Press .2 Select ( ) the icon and press( ) to open the setup menus.3 Select ( ) [ PLAY/OUTSETUP2]* and press ( ).4 Select ( ) [AV/PHONES] andpress ( ).5 Select ( ) [ PHONES] and press( ).( 8)/+-( 8)PLAY/OUT SETUP2AV/PHONES AVFUNC.
