LAN settings• Change LANEnables either wireless LAN, wired LAN, or access point mode. You can also disable all.• Wireless LAN setupSelects the setup method for wireless LAN connection.Note• You can also enter this setting menu by selecting Wireless LAN setup from the Setup menuscreen.When this menu is selected, the printer starts searching for a WPS-compatible access point. If theprinter detects the access point, follow the on-screen instructions to set up wireless LAN. If an accesspoint is not detected or if you select another setup method, select one of the setup methods below.◦ WPS (Push button)Select when you perform settings for wireless LAN using an access point supporting a Wi-FiProtected Setup (WPS) push button method. Follow the on-screen instructions during setup.◦ Other setupWPS (PIN code)Select when you perform settings for wireless LAN using an access point supporting a Wi-FiProtected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.Cableless setupSelect if you specify the settings of the access point information to the printer directly from adevice (such as a smartphone) without operating the access point. Follow the on-screeninstructions of the connecting device for the setup procedure.• Print LAN detailsYou can print out the network settings of the printer such as its IP address and SSID.For more information on the printer's network setting is printed out, refer to Printing Out Network SettingInformation.• Other settingsImportant• You cannot select the items below when LAN inactive is selected for Change LAN.◦ TCP/IP settingsPerforms IPv4 or IPv6 setting.◦ WSD settingSetting items when you use WSD (one of the network protocols supported in Windows 8.1,Windows 8, Windows 7, and Windows Vista).Enable/disable WSDSelects whether WSD is enabled or disabled.199
