The security has been strengthened more than WEP.If a network key has not been set, the Authentication Type Confirmation screen isdisplayed automatically. To change network key settings before, click Configuration... todisplay the WPA/WPA2 Details screen.Changing the WPA/WPA2 Detailed Settings5. Configuration...The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 keyselected in Encryption Method: can be confirmed and changed.For details on WEP setting:Changing the WEP Detailed SettingsFor details on WPA/WPA2 setting:Changing the WPA/WPA2 Detailed Settings6. TCP/IP Setting:Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for yournetwork environment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCPserver functionality must be enabled on your wireless LAN router or access point.Use following IP addressSelect this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.• Access Points Screen1. Detected Access Points:The signal strength from the access point, encryption type, name of access point, and the radiochannel can be confirmed.Important• If you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.228
