DR-3010CDR-3010C42y Color Saturation: Adjust the setting towards when you want to scan acolor document with low color saturation as a black-and-white document.y Proportion of Color: Adjust the setting towards when you want to scana color document with a low proportion of color as a black-and-whitedocument.- [Mode in case of binary]Select the scanning mode when a page is detected as black-and-white.- [Brightness]This setting adjusts the brightness when [Advanced Text Enhancement] or[Advanced Text Enhancement II] is selected from the Mode drop-down list. Forother modes, the brightness is set from the [Brightness] tab.- [Contrast]This setting adjusts the contrast when [Advanced Text Enhancement II] isselected from the Mode drop-down list. For other modes, the contrast is setfrom the [Brightness] tab.This section describes the procedure for selecting the size for scanning.1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box →select the page size from the Page Size drop-down list → click [OK].NOTE• Click [Auto-detection] to scan the following kinds of documents:- Documents of undetermined size- Documents including mixed page sizes- When using the Long Document mode (See "Setting the Long DocumentMode," on p.36.)• When [Auto-detection] is selected, the Area setting from the Scan Area dialogbox is disabled.• Depending on the application, the operation may become unstable when [Auto-detection] is enabled. In this case, [Auto-detection] should be disabled.Paper Size Settings
