Canon IMAGE FORMULA DR-3010C User Manual

Also see for 3093B002: Brochure & specs

Contents

DR-3010CDR-3010C53This section describes the procedure for selecting the method for feedingdocuments.1 Click the [Others] tab in the Properties for Canon DR-3010C dialog box →select the document feeding method from the Feeding Optiondrop-down list → click [OK].NOTE• Details of each feeding method are indicated below.[Standard Feeding]This feeding method is good for scanning small batches of documents that areplaced one batch at a time. Scanning stops when the documents have beenscanned.[Panel-Feeding]This feeding method is good for scanning batches of documents of differentsizes. After placing the documents, press the Start button on the Scan Panel tostart scanning, and press the assigned Stop button to stop scanning.y When scanning documents with different sized pages, after placing thedocuments, you can adjust the document guide position.[Automatic Feeding]This feeding method is good for scanning batches of the same sizeddocuments. Scanning starts when the scanner detects the placed documents,and stops when you press the Stop button.y When [Automatic Feeding] is selected, the Setting button is enabled toallow setting the delay time from when a placed document is detected towhen scanning starts. The delay time can be set from 0 to 60 seconds.Batch Separation (ISIS driver only)When the separation timing to use when scanning starts with batch separationenabled in the application. (If [Standard Feeding] is selected, batch separationis disabled.)[Auto]Document batches are separated automatically.[Panel]Document batches are separated when [Batch Separation] on the Scan Panel ispressed. (See "Using the Scan Panel," on p.30.)Feeding Options