Canon IMAGECLASS D800 Series Printer Manual

Also see for imageCLASS D800 Series: Setup instructions

Contents

2-152Installing the Printer Driver (Canon Advanced Printing Technology (CAPT))■ Windows 2000/XP/Server 2003 Plug and PlayThe following is the installation procedure of plug and play using a parallel port underWindows 2000.Before you install the software, make sure you do the following:• Connect the machine to your computer ( Set-up Instructions).• Turn on the machine ( Set-up Instructions).• Start up Windows 2000/XP/Server 2003.5 The Found New Hardware Wizard dialog box appears. Click Browse… to select the driverin the language that you want to install. For example, if your CD-ROM drive is drive D:,browse to D:\English\Win2000, then click OK.If you use Windows XP/Server 2003, and your CD-ROM drive is drive D:, browse toD:\English\WinXP (For Server 2003 the path name is the same as for Windows XP.).Click Next > on Driver Files Search Results.NOTEClick Yes if the Digital Signature Not Found dialog box appears.6 When the installation is complete, the following dialog box appears. Click OK to close thedialog box. Click Finish on the Found New Hardware Wizard.Parallel Port UsersIMPORTANTIf other printer drivers are already installed on the parallel port (LPT 1, etc.) of thecomputer connected to this printer, uninstall those drivers or select File: in the portselection dialog to set them for file output before installing Canon iC D800.