Canon IMAGECLASS MF249dw Getting Started

Also see for IMAGECLASS MF247dw: User guide Getting started

Contents

9EnSpecifying the Initial SettingsFollow the instructions on the screen, set the language, region,time zone, and date and time. For details on navigating themenu and how to input the numbers, see “Navigating theMenu and Text Input Method” ( P.8).1/2LanguageChinese (Simplified)Chinese (Traditional)EnglishFrenchGermanCurrent Time Set.08/08 2014 10:00 AM(0:00-12:59)ApplyChoosing the Method to Connect theMachine● Connecting via a Wired LANYou can connect the machine to a wired router. Use the LANcables to connect the machine to the wired router (accesspoint).Connect the computer to the router by cable or wirelessly.Make sure that there is an available port in the router to connectthe machine and the computer.Have a LAN Cable of Category 5 twisted-pair cable or higher ready.● Connecting via a USB cableYou can connect the machine to the computer using a USBcable.Make sure that the USB cable you use has the followingmark.● Connecting via a Wireless LAN(MF249dw/MF247dw Only)You can connect the machine to a wireless router*. Since itis wirelessly connected, no LAN cables are needed.* A wireless router (access point) that supports IEEE802.11b/g/n isrequired.Connect the computer to the router by cable or wirelessly.Check if your router has a buttonSelect from the following two methods depending on therouter (access point) that you are using.● There is a button.You can easily setup if your router (access point)has a button, and if the mark is on the router.● There is no button.If there is no button on your router (access point),manually select your SSID and complete the settings.NOTE• If you are looking to install your new device via aWireless Network connection, you can find a video andwritten guides with step-by-step instruction to assistyou through the process from the following URL:http://www.usa.canon.com/WirelessHelpViewing these guides will ensure a smooth setup of thedevice into your existing wireless environment.● Direct Connection(MF249dw/MF247dw Only)Connect a mobile device to the machine wirelessly anddirectly without routing through a wireless LAN router (oraccess point).User’s Guide “Can Be Used Conveniently with a MobileDevice” ▶ “Make Direct Connection (Access Point Mode)”Choosing the Method to Connect:Via Wireless LAN or Other Method● MF249dw/MF247dwDo you want to use thewireless LAN to connectto the network?The settings can beconfigured later.Yes NoCurrent Time Set.Must rechg. batteryfor 24 hours to savetime settings. Afterturning main power1/3CloseYesThere is a button.Start from step 4 of ”Push Button Mode” (P.11).There is no button.Start from step 4 of ”Setting the Access PointManually” (P.11).NoConnect to the computer via a wired LANProceed to “Connecting via a Wired LAN” (P.10).Connect to the computer via a USB cableProceed to “Connecting via a USB Cable” (P.10).Connect to the computer via a wireless LAN laterProceed to “Connecting via a Wireless LAN(MF249dw/MF247dw Only)” (P.10).● MF236nCurrent Time Set.Must rechg. batteryfor 24 hours to savetime settings. Afterturning main power1/3CloseConnect to the computer via a wiredLANProceed to “Connecting via a WiredLAN” (P.10).Connect to the computer via a USBcableProceed to“Connecting via a USBCable” (P.10).