Canon IMAGEFORMULA DR-2010M Reference Manual

9DocumentsThe scanner can scan documents ranging in size from business cardsand checks to LTR/A4. The document sizes that this scanner can scanare shown below.Plain PaperSizeWidth: 1.97" to 8.5" (50 mm to 216 mm)Length: 2.12" to 14.02" (53.9 mm to 356mm)*Paper weight: (Page separation mode)14 to 32 lb bond (52 to 128 g/m2) 0.0024" to 0.0059" (0.06 mmto 0.15 mm)Paper weight: (Bypass mode)11 to 42 lb bond (40 to 157 g/m2 ) 0.002" to 0.0079" (0.05 mm to0.20 mm)* You can scan documents up to 39.2" (1000 mm) long by settingthe scanner to the Long Document mode. (See “Setting the LongDocument Mode” on page 24.)IMPORTANTA document must meet the following criteria to be scannable:• When scanning multiple documents of different sizes, place thedocuments so that they cover the entire span of the feed rollers.• It is recommended that documents exceeding LTR, 11.69" (A4, 297mm) size are fed one sheet at a time.• Scanning documents before the ink is dry can cause problems withthe scanner. Always make sure that the ink on a document is drybefore scanning it.• Scanning documents that are written in pencil or similar materialmay make the rollers and scanning glass dirty, which can lead tosmudges on the scanned image and transfer the dirt to subsequentdocuments. Always clean the internal parts of the scanner afterscanning such documents.• When scanning a two-sided document that is printed on thin paper,the image on the opposite side of each page may show through. Inthis case, adjust the scanning intensity in the application softwarebefore scanning the document.• It is recommended that thin documents are fed one sheet at a time.• Scanning the following types of documents can cause a paper jamor malfunction. To scan such a document, make a photocopy of thedocument and then scan the photocopy.Business CardSize: 1.97" x 2.12" (50 mm x 53.9 mm) or largerPaper weight: 140 lb bond (300g/m 2 ) 0.0138" (0.35 mm) or lessIMPORTANTIf a stack of business cards cannot be fed properly, reduce thenumber of cards in the stack.CardSize: 2.12" x 3.37" (53.9 mm x 85.5 mm) (ISO/JISstandard)Card thickness: 0.03" (0.76 mm) or lessOrientation: Horizontal feeding onlyEmbossed cards can be scanned.CAUTION• If you place cards to be fed vertically, they may not be ejectedproperly, and cards that get jammed may be damaged when youremove them. Take care of the orientation when placing cards.• Embossed cards may not be able to be scanned correctly,depending on the type of embossment.Wrinkled or creaseddocuments Carbon paperCurled documents Coated paperTorn documents Extremely thin,translucent paperDocuments with paperclips or staples