Canon IMAGEFORMULA DR-2010M Reference Manual

Setup Guide Please read first.Checking the AccessoriesIf any of the items listed below are missing or damaged, contact your local authorizedCanon dealer or service representative.• Items included in this manual are subject to changewithout notice.• You must keep the machine’s packaging and packingmaterials for storing or transporting the machine.Installing the Feed Roller1 Slide the document guides to the leftand right, and open the roller cover. 2 Lift the roller fixing lever a, and slide it to the left b.3 Insert the feeding roller and align thenotch on the roller with the shaft onthe unit.4 Slide the roller fixing lever to the right and insert it into the hole on the left ofthe feeding roller a. Lower the roller fixing lever to secure the shaft of thefeeding roller b.5 Close the roller cover. It is properlyclosed when you hear a click. 6 Gently press on the sides of the frontunit to close it. It is properly closedwhen you hear a click.DocumentguidesRoller coverRoller fixing leverDR-2010M/DR-2510M Feed Roller USB Cable Type A/Type B(Length: 1.8 m)AC Adapter/Power Cord(Connected length: 2.6 m)Reference Guide(this document)Setup DiscThird-Party SoftwareThe following software is included on the supplied Setup disc.● Presto! BizCardBusiness card management software from NewSoft Technology Corp.Run the following installer from the Setup disc to install.➜ BizCard/BCRInstaller● Presto! PageManagerPhoto and document management software from NewSoft TechnologyCorp.Run the following installer from the Setup disc to install.➜ PageManager/PM8Installer* Presto! BizCard is a registered trademark of NewSoft Technology Corp.Remove the scanner from the box, and remove the orange tape and protective sheets (▼) from the scanner.☞ Continued on back sideAlthough this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read“DR-2010M” in place of “DR-2510M.”Registration Card(U.S.A and Canada only)Warranty Card(U.S.A and Canada only)